English
Español
русский
français
Deutsch
- Products
IGP-1 Series Internal Gear Pump
IGP-1 Series Internal Gear Pump Suppliers
Technical Parameter of IGP-1 Series Internal Gear Pump
|
Series-type |
Discharge capacity1) (ml/r) |
Revolution speed2) (r/min) |
Continuous working pressure (MPa) |
nmax Max surge pressure3) (MPa) |
|
|
Min |
max |
||||
|
IGP-1-3.5 |
3.6 |
400 |
3000 |
31.5 |
33 |
|
IGP-1-5 |
5.2 |
400 |
3000 |
31.5 |
33 |
|
IGP-1-6.3 |
6.4 |
400 |
3000 |
31.5 |
33 |
|
IGP-1-8 |
8.2 |
400 |
3000 |
31.5 |
33 |
|
IGP-1-10 |
10.2 |
400 |
3000 |
31.5 |
33 |
This parameter is indicated on the condition that mineral oil viscosity is 20~40cSt and pump suction oil pressure is 0.8bar (minimum) and 3bar (maximum).
The parameter shown in the table is listed according to the discharge capacity unit as cubic centimeter/r in order.
Notice:
1) Because of manufacturing error, the actual discharge capacity of the pump may be lower than that of ideal valve about 1.5%.
2) When revolution speed is lower than 400r/min or between 1500r/min and nmax, please contact us, so as to ensure surge pressure.
3) So-called allowed surge pressure is indicated that within one minute as working cycle, of which 15% is the allowed pressure peak.