English
Español
русский
français
Deutsch
- Products
Thread Mounting Overcentre Valve
Thread Mounting Overcentre Valve
Technical specification
|
Model |
HYPYZ-3/4 X |
|
|
Specification |
HYPYZ-3/4 S |
HYPYZ-3/4 D |
|
Max Pressure (Mpa) |
350 |
|
|
Max Flow (L/min) |
40 |
|
|
Installation site |
Any |
|
|
Working fluid |
Mineral oil, phosphate hydraulic oil |
|
|
Storage temp (℃) |
-20~80 |
|
|
Working temp (℃) |
-10~60 |
|
|
Cleanliness |
the max allowed cleanliness of the oil shall be as per Standard NAS1638, grade IX, recommendable filtering precision Min β 10≥75. |
|
(Please consult with us if your working condition is out of the technical parameter given above)
Note:
The valve is used to control the actuator’s move in single/dual direction, to realize following functions:
1. Prevent the surge pressure from the actuator
2. Limit the possible high-pressure when overloading or impact due to sudden shocking