English
Español
русский
français
Deutsch
- Products
Single Overcentre Valve
Use and operation:
These valves are used to control actuator’s movement and block in one direction in order to enable the following
functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributors).
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow side of the actuator and C2 to the actuator’s side you want the flow to be blocked. In-line mounting.
These valves are used to control actuator’s movement and block in one direction in order to enable the following
functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributors).
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow side of the actuator and C2 to the actuator’s side you want the flow to be blocked. In-line mounting.
Use and operation:
These valves are used to control actuator’s movement and block in one direction in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributors).
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow side of the actuator and C2 to the actuator’s side you want the flow to be blocked. In-line mounting.
Technical specification:
|
Type |
3/8” SE |
1/2” SE |
1/4” SE |
|
Pilot ratio |
1:3.1 |
1:3.1 |
1:5.5 |
|
Max flow (L/min) |
35 |
50 |
105 |
|
Max pressure (Bar) |
350 |
||