English
Español
русский
français
Deutsch
- Products
Double Overcentre Valve For Centre Closed
Use and operation:
These valves are used to control actuator’s movement and block in both directions in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away, as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V1 and V2 to the pressure flow, C1 and C2 to the actuator to be controlled.
These valves are used to control actuator’s movement and block in both directions in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away, as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V1 and V2 to the pressure flow, C1 and C2 to the actuator to be controlled.
Technical specification:
|
Specification |
1/4” DE/A |
3/8” DE/A |
1/2” DE/A |
3/4” DE/A |
|
Pilot ratio |
1:4.5 |
1:4.5 |
1:4.5 |
1:5.5 |
|
Max flow (L/min) |
20 |
40 |
60 |
95 |
|
Max pressure (Bar) |
350 |
|||