English
Español
русский
français
Deutsch
- Products
Double Overcentre Valve Flangeable
Use and operation:
These valves are used to control actuator’s movement and block in both directions in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V1 and V2 to the pressure flow and flangeable C1 and C2 directly to the actuator.
These valves are used to control actuator’s movement and block in both directions in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V1 and V2 to the pressure flow and flangeable C1 and C2 directly to the actuator.
Use and operation:
These valves are used to control actuator’s movement and block in both directions in order to enable the following.
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V1 and V2 to the pressure flow and flangeable C1 and C2 directly to the actuator.
Technical specification:
|
Specification |
3/8” DE/FL |
1/2” DE/FL |
|
Pilot ratio |
1:4.5 |
|
|
Max flow (L/min) |
40 |
60 |
|
Max pressure (Bar) |
350 |
|